RocketMQ Proxy

In a local network, you will need two computers to do this. One will be used as a proxy server, the other as a client. Then you need to activate the proxy on the server. And on the client PC - choose to access the Internet via a local network connection (i.e. from the server). Another option is to use a web server like Nginx.

Transferring a large byte array using UDP involves breaking the data into smaller chunks and sending each chunk as a separate UDP datagram. Since UDP is a connectionless protocol, there's no guarantee that the chunks will arrive in the same order they were sent. Therefore, you'll also need to send additional information to reassemble the data correctly at the receiver side.

Here's a simple example using Python to send and receive large byte arrays using UDP:

1. Sender (Python script send_large_data.py):

import socket

def send_large_data(data, host, port):
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    chunk_size = 1024

    total_chunks = len(data) // chunk_size + 1
    sequence_number = 0

    for i in range(total_chunks):
        start = sequence_number * chunk_size
        end = start + chunk_size
        chunk = data[start:end]

        sock.sendto(chunk, (host, port))
        sequence_number += 1

    sock.close()

if __name__ == "__main__":
    large_data = b"This is a large byte array sent using UDP." * 100
    host = "127.0.0.1"
    port = 12345
    send_large_data(large_data, host, port)

2. Receiver (Python script receive_large_data.py):

import socket

def receive_large_data(host, port):
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    chunk_size = 1024
    total_chunks = 0
    received_data = b""

    while True:
        data, address = sock.recvfrom(chunk_size)
        total_chunks += 1
        received_data += data

        if len(received_data) >= (total_chunks - 1) * chunk_size:
            break

    sock.close()
    return received_data

if __name__ == "__main__":
    host = "127.0.0.1"
    port = 12345
    large_data = receive_large_data(host, port)
    print("Received data:", large_data)

In this example, the sender script send_large_data.py breaks the large byte array into chunks of 1024 bytes and sends each chunk as a separate UDP datagram. The receiver script receive_large_data.py receives the chunks and reassembles them into the original byte array.

To check if a proxy server is working, you can follow these steps:

1. Open your web browser and go to a website that is not blocked by your proxy server.

2. In the address bar, enter the proxy server address and port number in the following format: http://proxy-server-address:port-number

3. Press Enter and wait for the page to load. If the page loads successfully, it means your proxy server is working.

4. If the page does not load or you see an error message, it means your proxy server is not working or is blocked by the website you are trying to access.

Alternatively, you can use online tools like Proxy Checker (https://www.proxychecker.com/) to test your proxy server. These tools will provide you with information on whether your proxy server is working or not.

Connect your computer to a functioning router, then open any browser, go to the settings and enable manual configuration. Specify the IP, gateway with DNSI and subnet mask in the appropriate fields. In the "Home network" tab, under "Computers", go to "IPMP Proxy" and turn off this function. Under "System", click on the gear symbol, and under "Components", specify the Proxy UDP HTTP utility and click "Refresh".

To connect to the Internet through a proxy server, you must authenticate with your username and password. This can be done by logging in automatically, by using a Windows agent, and by using a Web agent. With automatic login, as well as when using the Web-agent, you need to manually configure the address of the proxy server in your browser. The Windows agent does not require any special settings, because it sets up everything you need for work by itself.