Proxy for The Washington Post

Open the "Browser Properties" in the control panel, in the "Connections" section of the opened window select "Network Settings". Remove the check mark from the "Use proxy" item, click "OK".

You can check it with the ping command from the command line in Windows. It is enough to enter it, with a space - the data of the proxy server (including the number of the port used) and press Enter. The reply message will tell you whether or not you have received a reply from the remote server. If not, the proxy is unavailable, respectively.

The bitrate of a UDP output stream depends on the source of the stream and the encoding settings used to create it. If you have control over the encoding process, you can adjust the bitrate to meet your needs. Here's a general outline of how to set the bitrate for a UDP output stream:

1. Choose an encoding tool or software: To set the bitrate of a UDP output stream, you'll need to use a video encoding tool or software that supports UDP streaming. Some popular options include OBS Studio, Wirecast, and vMix.

2. Configure the encoding settings: Open the encoding software and navigate to the settings for video encoding. Look for options related to bitrate, which might be labeled as "Bitrate," "Target Bitrate," "Average Bitrate," or similar terms.

3. Set the desired bitrate: Choose the desired bitrate for your output stream. The bitrate is typically measured in kilobits per second (Kbps) or bits per second (bps). Lower bitrates will result in lower video quality, while higher bitrates will produce higher quality video but require more bandwidth.

4. Configure the output settings: In the encoding software, find the output settings and select "UDP" as the output protocol. You may also need to enter the IP address and port number of the destination server or device that will receive the UDP stream.

5. Start the encoding process: Once you've configured the encoding settings and output settings, start the encoding process. The encoding software will now encode the video source and stream it over UDP to the specified destination.

6. Monitor the stream: Keep an eye on the stream to ensure it's being transmitted successfully. You may need to adjust the bitrate or other settings if you encounter issues like buffering, low video quality, or high latency.

There are several options for its use: bypassing the blocking of websites, shopping in foreign online stores at regional (local) prices, access to a full library of media content, hiding your real IP-address.

Most often it is used on the iPhone just to bypass the blocking of access to certain resources. But also VPN is one of the most effective methods of protecting your confidential information. After all, with VPN all traffic is additionally encrypted, the provider can't read it even if it's intercepted.