Galaxytorrent Proxy

Before you change your proxy server, you should decide what kind of proxy you would like to install. There are a lot of choices, depending on your needs. Every buyer, when buying a proxy server, is given all the necessary information with the data for access - username and password, port, IP address. Without these data, you can't install and configure the proxy.

There are two options: setting up through the software of the TV itself. To do this, you will need to install a third-party application to redirect traffic. The second option is to organize a connection through a proxy on the router, through which the TV gets access to the Internet. Naturally, both of these options are relevant for modern TVs with Smart TV support.

The easiest way to set up a home proxy server is to install a router that supports this function. Then get the proxy data (provided by the service in which it is "rented") and enter it in the router settings. If there is no need for a common proxy (for all devices at once), then it should be configured separately for each device with the help of the utilities integrated in the OS for changing the connection properties.

UDP Hole Punching is a technique used to establish a connection between two devices behind NAT (Network Address Translation) firewalls. It works by exploiting the fact that some UDP packets can still pass through the NAT firewall even if the source and destination ports are the same. However, UDP Hole Punching does not always bypass NAT for several reasons:

1. Symmetric NAT: In symmetric NAT, both the source and destination ports are translated, and the NAT firewall maintains a table of active connections. If the table is not updated correctly, UDP hole punching may not work.

2. Unstable NAT: Some NAT firewalls are known to be unstable, causing them to drop packets or change their behavior unexpectedly. This can lead to failure in establishing a connection using UDP hole punching.

3. Firewall rules: Some NAT firewalls have strict rules that prevent UDP hole punching from working. For example, if the firewall is configured to block all incoming UDP traffic, UDP hole punching will not be successful.

4. Timeout: NAT firewalls have a timeout for their connection tables. If the timeout occurs before the connection is established, UDP hole punching will fail.

5. Network congestion: If the network is congested, packets may be dropped or delayed, causing UDP hole punching to fail.

In summary, while UDP hole punching can be an effective technique for bypassing NAT, it does not always guarantee a successful connection due to various factors such as NAT behavior, firewall rules, and network conditions.

You can bypass the blocking of the messenger by using the built-in proxy server in the application. To do this, go to "Settings" and then to the section "Data and storage". Here, in the "Proxy settings" tab, you will find the "Add proxy" item. A shield icon on the top line of the menu will indicate that the proxy is enabled.