Curl SOCKS5 Proxy Username Password

Before activating a proxy server in Opera, it is recommended that you clear your browsing history and cookies of sites. This is necessary to ensure that information about the computer is not transmitted during further connections. To do this, it is enough to follow the algorithm:

Open the browser.
Click on the opera icon in the upper left corner.
Hover your mouse cursor over the "History" item.
Use the option "Clear history of visits".
After that you need to specify parameters of the proxy server. To do this, perform the following actions:

Open your browser.
Click on the Opera icon in the top left corner.
Click on "Settings".
Select the "Advanced" option.
Scroll down to the "System" tab.
Click on "Open proxy settings for computer".
Click on "Network settings".
Activate the "Use a proxy server" option.
In the window that opens, specify the IP address of the proxy server. Enter the address in the field of the protocol to which the proxy server belongs. You can get this information from your provider.
Click "OK" to save your settings.

If you are experiencing TimeoutException errors when trying to run Selenium in headless mode in PyCharm, there are several potential causes and solutions. Here are some steps to troubleshoot and address the issue:

1. Increase Wait Time:

   • Headless mode may introduce additional latency, and elements might take longer to load. Increase the timeout for explicit waits to give the elements enough time to become available.

from selenium import webdriver
from selenium.webdriver.common.by import By
from selenium.webdriver.support.ui import WebDriverWait
from selenium.webdriver.support import expected_conditions as EC

driver = webdriver.Chrome(options=options)

# Increase the timeout as needed
wait = WebDriverWait(driver, 20)

# Example wait for an element to be clickable
element = wait.until(EC.element_to_be_clickable((By.ID, 'your_locator')))

• Use Different Locator Strategies:

  • If one locator strategy is causing timeouts, try using a different one. For example, switch from By.ID to By.XPATH or vice versa.

• Verify Element Identification:

  • Confirm that the element locator used in your script is correct and uniquely identifies the intended element.

• Check for JavaScript Errors:

  • Open the browser console and check for any JavaScript errors that might be affecting the behavior of the page.

• Increase Browser Window Size:

  • Some websites may behave differently in headless mode based on the window size. Try setting a larger window size.

options.add_argument('--window-size=1920,1080')

• Update ChromeDriver:

  • Ensure that you are using the latest version of ChromeDriver that is compatible with your Chrome browser version.

• Use a Custom User Agent:

  • Some websites may behave differently based on the user agent. Try setting a custom user agent.

options.add_argument('--user-agent=Your_Custom_User_Agent')

• Check for Captchas or Additional Security Measures:

  • Some websites may use captchas or additional security measures that could cause delays. Ensure that your script is not encountering captchas.

• Browser Profile:

  • In some cases, the behavior of the browser may change when running in headless mode. Experiment with different browser profiles or use a clean profile.

• Network Issues:

  • Ensure that there are no network-related issues that might be causing delays in loading elements.

• Check Proxy Settings:

  • If you are using a proxy, ensure that the proxy settings are configured correctly for headless mode.

• Headless Mode Compatibility:

  • Some websites may have issues with headless mode due to user agent detection or other factors. Test your script on different websites to see if the issue persists.

Connecting to a Selenium Hub via a corporate proxy can be challenging, as the proxy may require authentication or have specific settings that need to be configured. To connect to the Selenium Hub through a corporate proxy, you'll need to configure the proxy settings in your Selenium client and Hub.

Here's a step-by-step guide on how to set up a Selenium Hub and client with corporate proxy settings:

Configure the Selenium Hub:

First, you need to configure the Selenium Hub to use the corporate proxy. You can do this by modifying the Hub's configuration file (usually hub.yml or hub.json) and adding the proxy settings.

For example, if you're using the hub.yml file, add the following configuration:

proxy:
  type: http
  httpProxy: http://username:[email protected]:port
  nonProxyHosts: localhost, 127.0.0.1, .example.com

Replace username, password, proxy.example.com, and port with the appropriate values for your corporate proxy. The nonProxyHosts setting specifies a list of hosts that should not use the proxy.

Configure the Selenium client:

Next, configure the Selenium client to use the corporate proxy. You can do this by setting the proxy settings in your WebDriver configuration.

For example, in Python with the Chrome WebDriver, you can configure the proxy as follows:

from selenium import webdriver
from selenium.webdriver.chrome.options import Options
from selenium.webdriver.common.proxy import Proxy, ProxyType

proxy = Proxy()
proxy.proxy_type = ProxyType.MANUAL
proxy.http_proxy = "http://username:[email protected]:port"
proxy.ssl_proxy = "http://username:[email protected]:port"

chrome_options = Options()
chrome_options.add_argument("--proxy-server=%s" % proxy.proxy)

driver = webdriver.Chrome(options=chrome_options)
driver.get('your_url')

# Rest of your code

driver.quit()

Replace username, password, proxy.example.com, and port with the appropriate values for your corporate proxy.

Start the Selenium Hub and connect the client:

Start the Selenium Hub and connect the client to the Hub using the appropriate configuration settings.

For example, if you're using the hub.yml file, start the Hub with the following command:

selenium-server-standalone jar hub.yml

Connect the client to the Hub using the appropriate configuration settings. For example, in Python, you can connect the client to the Hub as follows:

from selenium import webdriver
from selenium.webdriver.remote.webdriver import WebDriver
from selenium.webdriver.common.desired_capabilities import DesiredCapabilities

desired_caps = DesiredCapabilities.CHROME
desired_caps['proxy'] = {
    'httpProxy': 'http://username:[email protected]:port',
    'ftpProxy': 'http://username:[email protected]:port',
}

driver = WebDriver(desired_caps=desired_caps)
driver.get('your_url')

# Rest of your code

driver.quit()

Replace username, password, proxy.example.com, and port with the appropriate values for your corporate proxy.

By following these steps, you should be able to connect to a Selenium Hub via a corporate proxy and use the Selenium client to interact with webpages.

Go to "Control Panel" and in "Small icons" mode, find the item "Browser properties", aka "Internet Options". In the "Connection" tab, click on "Network Settings", and then leave the item "Automatic detection of parameters" enabled in the window that opens, and disable everything else.

The easiest way to set up a home proxy server is to install a router that supports this function. Then get the proxy data (provided by the service in which it is "rented") and enter it in the router settings. If there is no need for a common proxy (for all devices at once), then it should be configured separately for each device with the help of the utilities integrated in the OS for changing the connection properties.