Soft Cream Proxy

To check if your proxy is working, you can perform a simple test by accessing a website through the proxy. Here's a step-by-step guide:

1. Open your web browser and navigate to a website that you can use to test your proxy connection. Websites like "http://www.whatismyip.com/" or "https://www.proxy-check.org/" are commonly used for this purpose.

2. If you're using a proxy server, you'll need to configure your browser or a proxy extension to use the proxy. You can usually find this setting in your browser's network settings or under the proxy settings.

3. Enter the proxy server address (IP address or hostname) and port number in the appropriate fields in your browser or proxy extension settings.

4. Save your changes and refresh the web page with the test site.

5. If the proxy is working correctly, the website should display your proxy's IP address or a different IP address than your original one. This indicates that the proxy is successfully routing your traffic.

6. If the website displays your original IP address, it means that the proxy is not working or not being used.

To find the proxy server of your printer, follow these steps:

1. Check the printer manual: The manual may contain information about the proxy server or how to access the printer's settings.

2. Access the printer's settings: Connect your printer to your computer or network, and then access the printer's settings through the printer's control panel or the software you use to manage the printer.

3. Look for network settings: In the printer settings, search for a section related to network settings, network configuration, or network connection.

4. Find the proxy server information: In the network settings, look for information about the proxy server address, port, and authentication details (if applicable).

If you're unable to find the proxy server information in the printer settings, it's possible that your printer doesn't use a proxy server. In such cases, you can directly connect the printer to the internet using an Ethernet cable or through your Wi-Fi network.

To create your own proxy server, you can use open-source software such as Privoxy or Squid. Here's a step-by-step guide using Privoxy:

Install Privoxy: Download the latest version of Privoxy from the official website (https://www.privoxy.org/download/) and install it on your computer. The installation process varies depending on your operating system.

Configure Privoxy: After installing Privoxy, open the configuration file, usually located at /etc/privoxy/config.txt on Linux or C:\Program Files\Privoxy\config\config.txt on Windows. You can also find the configuration file in the installation directory.

Edit the configuration file: Open the configuration file in a text editor and make the following changes:

Uncomment the following line by removing the # symbol at the beginning:

listen-address 0.0.0.0

Uncomment the following line and change the port number if desired (e.g., 8118):

listen-port 8118

Uncomment the following line to enable HTTPS support:

forward-suffix .privoxy

Add the following line to forward requests to a specific destination server (replace with the desired server's address):

forward-suffix 

Save the configuration file and restart Privoxy: Close the text editor and restart Privoxy to apply the changes. On Linux, you can use the following command:

sudo /etc/init.d/privoxy restart

On Windows, locate the Privoxy service in the Windows Services list and restart it.

Test your proxy server: Open a web browser and configure it to use your new proxy server (e.g., http://localhost:8118). Test by accessing a website to ensure that the proxy server is working correctly.

To install a proxy server in Google Chrome, you must do the following steps:

Open the browser.
Click the "?" icon in the upper right corner.
Go to "Settings".
Select the "Advanced" option.
Click the "System" tab.
Click on "Open proxy settings for your computer".
Click on "Network settings".
Activate the "Use proxy server" option.
In the tab that opens, specify the IP address of the proxy server. You must enter the address in the field of the protocol to which the proxy server belongs. You can get this information from the provider. Click the "OK" button to save your settings.

Go to the site Register and confirm profile creation via email (may go into your spam folder). Add accounts from Instagram. Click on your username at the top right. Go to "Proxy Settings." Click on "Add new proxy". Specify your proxy details. Select the Instagram accounts you want to proxy.