Proxy Plus

There are two options: setting up through the software of the TV itself. To do this, you will need to install a third-party application to redirect traffic. The second option is to organize a connection through a proxy on the router, through which the TV gets access to the Internet. Naturally, both of these options are relevant for modern TVs with Smart TV support.

In the ps4 settings, go to "Network" and click on "Establish an Internet connection". In the window that appears, select "How to connect to the network" and check your option: Wi-Fi or Lan. When selecting the connection method, check "Special", and when setting the IP address, click on "Automatic". After that, under "Proxy Server", select "Use", enter the IP address, the port of the proxy server and press "Enter".

Free proxies, while seemingly profitable and attractive, are actually not very effective. They cannot boast of security, speed, stability and acceptable duration of work. Qualitative and reliable proxies require a certain investment, but they can be obtained from companies that have a good reputation as proxy service providers. You can also find out about all the nuances of proxy selection with the help of special proxy databases.

If you're facing issues where Selenium WebDriver (using JUnit) is not able to locate elements that were detectable by Selenium IDE, there could be a few reasons for this discrepancy. Here are some common troubleshooting steps:

1. Timing Issues

Selenium WebDriver might execute commands faster than Selenium IDE, leading to timing issues. Add explicit waits in your WebDriver script to ensure that the elements are present or visible before interacting with them.

import org.openqa.selenium.By;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.WebElement;
import org.openqa.selenium.support.ui.ExpectedConditions;
import org.openqa.selenium.support.ui.WebDriverWait;

// ...

WebDriverWait wait = new WebDriverWait(driver, 10);

// Example: Wait for an element to be clickable
WebElement element = wait.until(ExpectedConditions.elementToBeClickable(By.id("yourElementId")));
element.click();

2. Different Browser Profiles

Selenium IDE may use a different browser profile or settings compared to your WebDriver script. Ensure that the browser profile and settings are consistent.

3. Synchronization Issues

Elements might not be fully loaded or rendered when WebDriver tries to locate them. Add proper synchronization mechanisms to wait for the page to be ready.

4. Browser Window Size

Ensure that the browser window size in Selenium WebDriver is suitable for the elements to be visible. Use the manage().window().maximize() method to maximize the browser window.

driver.manage().window().maximize();

5. JavaScript Execution

Selenium IDE may execute JavaScript differently than WebDriver. If your website relies heavily on JavaScript, ensure that WebDriver handles JavaScript appropriately.

6. Switching to Iframes

If the elements are inside iframes, make sure to switch to the correct iframe using driver.switchTo().frame() before interacting with the elements.

7. Browser Console Logs

Check the browser console logs for any error messages or warnings that might indicate issues with JavaScript or other resources.

System.out.println(driver.manage().logs().get("browser").getAll());

8. CSS Selectors and XPath

Selenium IDE may use different selectors than your WebDriver script. Double-check the selectors (CSS or XPath) used in your WebDriver script.

9. Browser Extensions

Selenium IDE may have browser extensions installed that affect the behavior of the web page. Ensure that WebDriver runs in an environment that mimics the configuration used by Selenium IDE.

10. Headless Mode

If Selenium IDE is running in headless mode, try running your WebDriver script in headless mode as well to replicate the environment.

If the issue persists after considering these points, you may want to inspect the HTML source of the page and compare it with the recorded script in Selenium IDE to identify any differences.

When choosing a proxy through which to connect to Skype, pay attention to the stability of its work, the level of anonymity and low load that exceeds the final speed of the connection. Launch the Skype application and open the context menu "Tools". Through the "Advanced" tab, go to "Connection" to open the "Change settings" tab. Here, in the special form, specify the IP address and port, and then click "Save" and restart Skype.