Proxy Overlay

Before you change your proxy server, you should decide what kind of proxy you would like to install. There are a lot of choices, depending on your needs. Every buyer, when buying a proxy server, is given all the necessary information with the data for access - username and password, port, IP address. Without these data, you can't install and configure the proxy.

To check if a proxy server is working, you can follow these steps:

1. Open your web browser and go to a website that is not blocked by your proxy server.

2. In the address bar, enter the proxy server address and port number in the following format: http://proxy-server-address:port-number

3. Press Enter and wait for the page to load. If the page loads successfully, it means your proxy server is working.

4. If the page does not load or you see an error message, it means your proxy server is not working or is blocked by the website you are trying to access.

Alternatively, you can use online tools like Proxy Checker (https://www.proxychecker.com/) to test your proxy server. These tools will provide you with information on whether your proxy server is working or not.

In the main window of the program, select "Advanced", then "Options". In the "Basic" section, there is the "Proxy settings" item. Click on "Configuration" and enter the server address, port number, protocol type used and so on.

First you should check if its characteristics are correct. Some proxy servers are just IP address and port number, others use so called "connection script". You need to double-check that the data was entered correctly.

There are 2 ways to do this. The first is to manually change the settings in /etc/environment, but you will definitely need root access to do that. You can also use the Network Manager utility (compatible with all common DEs). You just have to make sure beforehand that the driver for the network adapter to work properly is installed on the system.