Configure any available plan and add-ons. Pay only for 48 hours.
Try proxiesUnblock LinkedIn with your own static address instead of a shared VPN exit: one dedicated IP, a minute of browser setup, and a login geography that never jumps — from $3.50/month.
The block usually lives at the edge of the network, not on your device. A corporate firewall drops linkedin.com by category filter; a national restriction — Russia has ordered the site blocked since 2016 — makes every ISP in the country do the same. Either way, the mechanism is identical: the filter inspects where your connection is headed and refuses it. Routing through your own static IP in an unrestricted location changes what the filter sees: your traffic leaves the network addressed to the proxy — an IP on no blocklist — and the proxy connects to LinkedIn from a country where nothing stands in the way.
Setup takes about a minute and no software: enter the address and port in your browser or system proxy settings, and with whitelist authentication there’s nothing further to type — the proxy recognizes up to 5 of your own IPs, so no credentials sit in any config. One honest boundary: this works on a device you control. If you’re on a company-managed laptop where settings are locked by policy, changing the proxy isn’t in your hands — that situation is IT’s to solve, not ours.
What makes LinkedIn different from most blocked sites is what happens after you get in. The platform proactively restricts accounts over unusual login locations, and lifting a restriction can require government-ID verification through a third-party service — a far bigger problem than the block ever was, and for holders of some countries’ documents currently a dead end. That’s the case against shared VPN exits and rotating proxies, which show LinkedIn a different city or country every session. A single dedicated address gives your account one consistent login geography, so the security system has nothing to react to.
The four proxy options we offer — and the use cases each one fits best.
| DatacenterIPv4 packages | Rotating proxiesfull shared pool | ISPstatic residential | Our pick for LinkedIn Dedicatedexclusive IPv4 |
|
|---|---|---|---|---|
| IP source | Datacenter, IPv4 | Datacenter, IPv4the same 100,000+ IP pool | Consumer ISP networks | Datacenter, IPv4 |
| Who uses the IP | Up to 5 customers per IPnever concurrently | Shared pool available to all rotating-proxy customers | Up to 5 customers per IPnever concurrently | Exclusive to youfor the entire plan term |
| IP persistence | Static listup to three free refreshes per month | Exit IP rotates on every requestwell suited to high-volume web scraping | Static listone free refresh every eight days | Staticreserved for the entire plan term |
| Pricing model | By IP countunlimited bandwidth | Per requestfull pool access | By IP countunlimited bandwidth | By IP countunlimited bandwidth |
| Cost predictability | Fixedbased on IP count | Variabledepends on request volume | Fixedbased on IP count | Fixedbased on IP count |
| Speed | Up to 500 Mbpsper proxy | Up to 300 Mbpsper connection | Up to 500 Mbpsper proxy | Up to 500 Mbpsper proxy |
| Suitability for strict anti-fraud systems | Limiteddatacenter origin remains visible | Moderaterotation reduces repeated requests from a single IP | HigherISP-registered residential IPs | Moderatethe IP's reputation depends only on you |
| Scaling | 100–100,000+ IPslarger packages have a lower price per IP | No fixed list to scaleyou pay per request, not per IP | Package-basedtotal cost increases with IP count | Starts at one IPbest for targeted use cases; volume pricing is available on request |
| Minimum order | From 100 IPs | From 2.5 million requests | From 100 IPs | From 1 IP |
| Price | $from $0.07 per IP/month | $$from $49.00/month | $$from $0.22 per IP/month | $$$from $3.50 per IP/month |
| Best for | Steady volumes: web scraping and automation using a fixed proxy list | Burst workloads and one-off projects: maximum IP diversity without buying a list | Social media, accounts, long sessions — wherever IP trust matters | Accounts and messaging apps, where the IP is part of your reputation and you need a clean IP reserved exclusively for you |
| Buy now | Rotating proxies | ISP proxies | Dedicated proxies |
A LinkedIn proxy is a browser or system setting away — host and port, plus a login and password unless you use the whitelist. Copy the example for your stack, or paste it into your AI coding assistant to adapt.
# HTTP or HTTPS proxy curl -x http://login:password@IP:port https://example.com # SOCKS5 curl --socks5-hostname IP:port \ --proxy-user login:password \ https://example.com
import requests proxy = "http://login:password@IP:port" # your proxy from the Dashboard r = requests.get( "https://example.com", proxies={"http": proxy, "https": proxy}, ) print(r.status_code)
import { ProxyAgent } from "undici"; const dispatcher = new ProxyAgent("http://login:password@IP:port"); const res = await fetch("https://example.com", { dispatcher }); console.log(res.status);
$ch = curl_init("https://example.com"); curl_setopt($ch, CURLOPT_PROXY, "IP:port"); curl_setopt($ch, CURLOPT_PROXYUSERPWD, "login:password"); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); $response = curl_exec($ch);
Choose a standard format or create a custom one with any field order and delimiter your software requires.
See the FAQ for the ports used by each protocol.
You can automate purchases, renewals, whitelist changes, and proxy list exports. Create an API key in your Dashboard in a couple of clicks.
Claude, Cursor, and other agents buy proxies, renew plans, and export updated proxy lists through an access token you create in your Dashboard. See how it works.
Per-IP prices shown are for the largest package size. Get an exact quote in the calculator above.
| IP | Country | Port | Protocol | |
|---|---|---|---|---|
| 212.183.88.215 | AT | 80 | HTTP | |
| 47.243.92.199 | HK | 3128 | HTTP | |
| 212.183.88.153 | AT | 80 | HTTP | |
| 212.183.88.13 | AT | 80 | HTTP | |
| 203.95.199.159 | KH | 8080 | HTTP | |
| 154.92.9.3 | JP | 80 | HTTP | |
| 113.204.79.230 | CN | 9091 | HTTP | |
| 181.214.1.97 | AE | 80 | HTTP | |
| 219.93.101.63 | MY | 80 | HTTP | |
| 185.18.250.64 | CH | 80 | HTTP |
A few service metrics—and feedback from our customers.
I use proxies for online games. I have been using the service for many months and I am satisfied with the quality and efficiency. Proxies work as they should and there are practically no disconnects. I recommend it, you will not regret it!
Like the service! Responsive and fast support, affordable prices, convenient renewal panel and network selection. Just what I need!
If you need to buy proxies at an affordable price, this is the best choice. I became a client of the service half a year ago. The cost is adequate, technical support always tries to help, and most importantly, you can use proxies without a password and login!
I used the service for social networking. At first I bought it for a month, but now I will definitely renew it because the quality is really good! I am very glad that I finally found a really cool service!
Can't find your answer? Message us in live chat — real humans reply.
Yes — one dedicated IP is exactly the right size for one account, and it’s the smallest thing we sell: $3.50 a month, no package required. Your laptop and phone on the same home network count as a single source IP for the whitelist, so both reach LinkedIn through the same proxy without any credentials. The only reason to buy more is more accounts — see the next question before you do.
You can point each account at its own dedicated address, and on the network layer that’s the correct setup — one account, one permanent IP, one browser profile, never mixed. But we’d be selling you a false comfort if we stopped there. LinkedIn is the strictest major platform on this: its terms allow one account per person, and enforcement goes beyond IPs to device fingerprints, browser data, and the personal details on the profiles themselves. An account restricted for multi-accounting typically has to pass government-ID verification to come back — and a second profile can’t survive that check, because the ID matches only one name.
So the honest framing is: proxies give each account clean network isolation, which is necessary but not sufficient, and the residual risk is yours. Where multiple accounts are legitimate — you manage company pages or run outreach for clients from their accounts — the per-account address rule is the right practice, not a workaround.
It prevents the next one; it doesn’t lift the current one. LinkedIn proactively restricts accounts when logins jump between cities or countries — it reads that as a possible takeover — and the way back in runs through its recovery process, sometimes including ID verification through a third-party service. A proxy can’t shortcut that, and whatever you do, don’t register a fresh account while restricted: LinkedIn links accounts by device and IP, and a new profile created during a restriction tends to get flagged immediately.
What the proxy fixes is the pattern that caused this. Pick an address once — ideally in the country your profile actually lives in — log in through it, and stay put. From that point every session shows the same geography, and the anomaly detector goes quiet.
On the network layer, yes — any tool that accepts an HTTP or SOCKS5 proxy can route through a dedicated address. But know what the proxy does and doesn’t cover. LinkedIn hunts automation aggressively: it watches connection-request velocity, profile-view bursts, and message cadence, and those signals live in your account’s behavior, not its IP. A clean address keeps your tool’s traffic from sharing an exit with someone else’s abuse; it does not make 500 connection requests a week look human. If you automate a logged-in account, the account carries the risk — keep volumes conservative and treat the proxy as isolation, not immunity. Logged-out research on public pages is the lower-stakes lane, and for volume work there the rotating pool is the better fit than a single static IP.
A different proxy type may be a better fit for your use case. All products use the same Dashboard and support team.
An IP reserved exclusively for you, available from a single IP. Speeds of up to 500 Mbps per proxy.
Learn moreStatic ISP-registered residential IPs for use cases where network origin matters.
Learn morePay per request and access the full 100,000+ IP pool through a single gateway. Built for web scraping and API workloads.
Learn moreSOCKS5 with UDP support — for gaming, streaming, and VoIP.
Learn moreWe can sign a contract and provide all the documents your accounting team needs. Most business orders are activated within 24 hours of your request.