K3s Proxy

In the browser menu (top right corner), find "Settings", and then, under "Network settings", go to "Settings" to select "Manual network configuration". Enter, depending on your network protocol, the IP address, the port and click on "OK". Open any website and in the window that appears, enter the proxy password and login, then click "Ok" again. A successful connection to the site means that the setup is successfully completed.

UDP (User Datagram Protocol) is a transport layer protocol that provides a simple and fast way to send data over a network. Unlike TCP, UDP does not establish a connection between the sender and receiver before sending data. Instead, UDP uses a connectionless communication model, where each datagram (data packet) is sent independently.

Here's how UDP works:

1. The sender application prepares the data to be sent and wraps it in a UDP datagram. This datagram contains the data, the source IP address, the destination IP address, and a checksum for error detection.

2. The sender application sends the UDP datagram to the network layer, which then forwards it to the appropriate network interface for transmission.

3. The datagram is transmitted over the network as a single, self-contained packet. There is no guarantee that the datagram will reach its destination, as UDP does not provide any error correction or retransmission mechanisms.

4. The receiving application listens for incoming UDP datagrams on a specific port. When a datagram arrives, the network layer forwards it to the appropriate application.

5. The receiving application processes the datagram, extracts the data, and handles any errors detected by the checksum.

It's important to note that UDP does not establish a connection between the sender and receiver. This means that there is no handshake or acknowledgment of receipt, and the sender does not know if the datagram was successfully delivered. UDP is often used for applications that prioritize speed over reliability, such as video streaming, online gaming, and VoIP (Voice over Internet Protocol).

If your proxy is not connecting, there could be several reasons for the issue. Here are some steps you can take to troubleshoot and resolve the problem:

1. Check the proxy settings: Ensure that you have entered the correct proxy server address, port, and authentication credentials (if required) in your browser or application settings. Double-check for any typos or errors in the information.

2. Verify the proxy server status: Confirm that the proxy server is up and running. If you are using a third-party proxy service, check their website or contact their support for any ongoing issues or outages.

3. Test the internet connection: Disable the proxy settings and try connecting to the internet directly. If you can connect without the proxy, the issue might be with the proxy server itself.

4. Check for firewall or antivirus interference: Ensure that your firewall or antivirus software is not blocking the proxy connection. You may need to add an exception for the proxy server in your firewall or antivirus settings.

5. Update your browser or application: Make sure you are using the latest version of your browser or application, as older versions might have compatibility issues with the proxy server.

6. Clear browser cache and cookies: Sometimes, corrupted cache or cookies can cause issues with proxy connections. Try clearing your browser cache and cookies, then restart the browser and try connecting again.

7. Try a different proxy server: If the issue persists, consider using a different proxy server. You can find various proxy servers online, but be cautious when using free proxies, as they might be slow, unreliable, or insecure.

8. Consult support resources: If you are still unable to connect to the proxy server, consult the support resources or documentation for your browser or application. You can also reach out to the proxy server provider's support team for assistance.

It is necessary to go to "Settings", select "WiFi", then specify the network for which you want to disable the proxy. After that, tap on "Proxy settings" and check "Off". This option is valid for iOS version 10 and higher.

In Windows 8 and later editions it is recommended to setup network proxy through Group Policy. To do this, run GPMC.msc (via "Run" or enter in the "Search"), then select the section with the users, from the list of parameters select "Internet Settings". Further settings are not different from the standard ones in Windows. You can set proxy, specify the start page, enter restrictions and so on.