Houthi Iran Proxy

In the upper right corner of the browser, click "Settings and Other", and then select the "Options" tab in the window that appears. Once the "General" window opens, locate the "Advanced" tab and click "Open proxy settings" in the menu that appears. Here, in the line "Use a proxy server", select "On". In the "Address" field, you must specify the IP address of the proxy, and in the "Port" field - the port of the proxy. The last thing to do is to click "Save".

It is a service that provides the ability to use a proxy server. It provides connection data (IP address and port number) as well as remote equipment that acts as a "gateway" for transferring traffic.

In UDP communication, there is no built-in mechanism to confirm if the client has received data from the server. UDP is a connectionless protocol, which means it does not establish a connection between the client and server, and therefore, it does not provide any reliability guarantees.

However, there are some techniques you can use to improve the reliability of UDP communication and get an indication that the client has received data:

1. Acknowledgment packets: The server can send acknowledgment packets after sending data to the client. The client can then send acknowledgment packets back to the server after receiving the data. If the server does not receive the acknowledgment packets within a specific timeout period, it can assume that the client has not received the data.

2. Timeout and retransmission: The server can implement a timeout and retransmission mechanism. If the server does not receive an acknowledgment packet within a specific timeout period, it can resend the data and continue to do so until it receives an acknowledgment or reaches a predefined limit.

3. Checksums or hashes: The server can send data along with a checksum or hash value. The client can then calculate the checksum or hash of the received data and compare it with the value sent by the server. If the values match, the client can be confident that it has received the data correctly.

In UDP, the term "connected" has a different meaning compared to TCP. Since UDP is a connectionless protocol, there is no established connection between the sender and receiver. However, you can determine if the UDP socket is in a listening state or if it has been successfully created.

To check if a UDP socket is in a listening state, you can use the socket.SOCK_DGRAM type and the bind() method. If the socket is successfully created and bound to an address and port, it will be in a listening state and ready to receive incoming UDP packets.

Here's an example using Python:

import socket

# Create a UDP socket
server_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)

# Bind the socket to an address and port
server_address = ('localhost', 12345)
server_socket.bind(server_address)

# Check if the socket is in a listening state
print("Socket is in a listening state: ", server_socket.getsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR) == 1)

# Close the socket
server_socket.close()

In this example, the bind() method creates a UDP socket and binds it to the specified address and port. The getsockopt() method is used to retrieve the SO_REUSEADDR option, which indicates whether the socket is in a listening state. If the value is 1, the socket is in a listening state and ready to receive incoming UDP packets.

A DNS server is a remote computer that receives a domain request from a user device. And it converts it into an IP address. Sometimes it is through the DNS-server that ISPs block sites. And DNS-proxy, respectively, allows you to bypass these restrictions completely.