Distributed Proxy Server

The proxy settings in Zoom are configured through the regular Windows settings. To do this, you can use the command inetcpl.cpl in "Run". Next, you need to go to the "Connection" tab, click on "Network Setup". In the dialog box that opens, select "Proxy server" and set the required parameters. As a port, you can use 80 and 443.

Click on the three bars located in the upper right corner and click on "Settings". When the settings page appears in front of you, go down to the "System" section and click on "Proxy settings". In the window that appears, click on "Network settings" and then check the box next to "Use a proxy server for local connections". Now all you have to do is enter the IP address and port of the proxy server, and then save your changes.

In Windows 8 and later editions it is recommended to setup network proxy through Group Policy. To do this, run GPMC.msc (via "Run" or enter in the "Search"), then select the section with the users, from the list of parameters select "Internet Settings". Further settings are not different from the standard ones in Windows. You can set proxy, specify the start page, enter restrictions and so on.

Regular Windows functionality has a minimum of settings for proxies. Therefore, it is recommended to use third-party applications for this purpose. For example, Proxy Switcher or Proxifier. There you can not only set the server characteristics but also, for example, create a folder for packets of traffic that are transmitted through the local network.

On smartphones, when a proxy is turned on, the corresponding indicator (the "VPN" icon) appears in the status bar. In Windows you have to go to "Settings", open "Network and Internet". Under "Proxy Server", if the item "Manual" is activated, it means that the proxy is engaged right now.